Sitemap
+380674000972
0Cart

Manicure pusher pica Staleks Pro Combo Uniq 19 replacement blade part WPPQ-19

Ask a question
95547
125 грн
Staleks
In stock
+ −
Add to wish list
Delivery
  • Nova Poshta - Branch
  • Nova Poshta - Courier delivery
  • UkrPoshta
  • International delivery
  • By courier in Kyiv from 100 UAH
  • Pickup from the store
Payment Options
  • Card payment
  • Visa and MasterCard cards
  • C.O.D
  • Cashless payments
Our advantages

The working part of the Combo UNIQ 19 shovel, the WPPQ-19 pusher pick, is a replaceable module that screws into the Combo UNIQ double-sided handle and allows you to create an effective tool. The master can choose and combine modular working parts at his own discretion, assembling a variant suitable for a specific procedure.

The replaceable working part of the manicure pusher pick for the Combo UNIQ 19 spatula is used to carefully remove dry skin from the nail plate and the periungual area, as well as to clean the free edge of the nail from dirt. The narrowed, slightly curved tip guarantees precise and delicate work when performing manicure and pedicure. On the back there is a threaded mechanism for connecting to the handle.

Working part of the Combo UNIQ 19 pick pusher WPPQ-19 blade: material

The STALEKS PRO pusher is made of durable stainless steel, a material known for its strength and wear resistance. The polishing of the UNIQ series instruments protects the surface during disinfection and sterilization, and also prevents corrosion.

The threading mechanism is made of aluminum, and the non-working part of the nozzle is covered with silicone. The bright pink silicone is hypoallergenic and pleasant to the touch. The coating is anti-slip, so the tool is securely fixed in the hand of the master, the brush works without tension and gets less tired. Both the metal and silicone parts tolerate sterilization in dry heat and autoclave, disinfection with chemicals compatible with aluminum.

Replaceable working part pusher for manicure pick for spatula Combo UNIQ 19: features

  • the working part of the pusher pick;
  • made of stainless steel and hypoallergenic pink silicone, aluminum-based carving;
  • size: length — 64 mm (thread 10 mm), diameter — 9.7 mm, weight — 5 g;
  • the tool is resistant to corrosion;
  • when worn, the working module is replaced without the need to purchase a blade;
  • withstands all types of sterilization and disinfection with chemicals compatible with aluminum.

Application of the Staleks Combo UNIQ 19 pusher pick:

  1. Assemble the tool: take the COMBO handle, screw in the modules that are suitable for the task and procedure on both sides.
  2. Use when performing pedicures and manicures.
  3. After the procedure, disinfect the working parts without removing them. It is advisable to choose products that destroy hepatitis viruses, C, and ringworm.
  4. Clean and dry. Place instruments in bags during dry heat sterilization, or arrange in containers during autoclave sterilization to avoid damaging delicate elements by creating proper air or steam circulation.
  5. Keep the pusher dry and clean in a case or box. Choose a dry storage location to prevent rust and mold. Avoid moisture, dust, loose, abrasive substances.
  6. If the tool is dropped, inspect the fine parts for damage. If you find any damage that requires repair, contact a service center.

Care and storage recommendations

The modules do not need to be unscrewed or twisted during maintenance - the assembled pusher can be disinfected with special agents, sterilized in a dry heat oven or autoclave.

To ensure that the tool lasts as long as possible, you must follow simple care rules:

  1. Store in a dry place, protected from moisture and out of reach of children.
  2. After use, it must be cleaned and dried thoroughly.
  3. Avoid contact with acids and alkalis during sterilization.
  4. It is important to use specialized disinfectants that are compatible with aluminum, because the spatula handle and the threads for screwing in the parts are made of aluminum.
  5. Do not use abrasive or metal objects for cleaning.
  6. Protect from falls on hard surfaces and exposure to aggressive substances.

If all operating and storage conditions are met, the tool will last indefinitely, maintaining its efficiency and quality.



Quality control

The enterprises have implemented a system of incoming and outgoing control that meets the international standards DSTU ISO 9001:2015. These standards provide for quality control at each stage of production.

Tools at the Staleks production facility undergo several stages of technical control. First, every detail is carefully checked: sharpness of edges, screw, polishing. And then — overall performance, assembly quality and how the new batch withstands repeated use

You can buy Manicure pusher pica Staleks Pro Combo Uniq 19 replacement blade part WPPQ-19 in our online store Limonad with delivery to Ukraine and Europe, including Poland, Germany, Bulgaria, Czech Republic, France, Romania and many other countries.

Tool type:
  • Pike
Manufacturer country:
Ukraine
Brand:
Staleks

No reviews found

Similar products
You watched