Modelling nail gel PNB UV/LED 4 in 1 BIAB Gel Fleur, 17 ml

4 in 1 BIAB Gel PNB 4 in 1 is a primer, foundation, gel and color in one bottle.

4 in 1 BIAB Gel PNB is a type of gel strengthening that is applied directly to the natural nail to promote its growth and reduce the risk of breakage. The tool does not require separate use of a primer or base, as they are already present in the product. Thanks to this, 4 in 1 BIAB Gel PNB will become an indispensable assistant for every master, because it significantly reduces the time of manicure and saves money.

UV/LED 4 in 1 BIAB GEL PNB, Fleur – dusty pink is associated with femininity and restraint. Such a shade will be an ideal base for everyday life or a successful addition to a festive look. With the Fleur color, it is impossible to make a wrong choice, because it is a complete match!

Advantages:

• Saving time and money: the product does not require a primer, base or other means, because it creates a solid material reinforcement immediately with color;
• Does not chip, gives nails strength that was never naturally present and helps to grow length;
• Suitable for thin nails;
• You can create a full coverage with one product;
  100% gel system;
• Suitable for any design and length;
• Unlike BIAB analogues in the world, which contain acrylic acid in the composition, 4 in 1 BIAB Gel PNB is completely hypoallergenic and safe for use by craftsmen and their clients;
• Fast and reliable polymerization due to several photoinitiators in the composition.The degree of polymerization will be more complete, and this guarantees a lower probability of allergic reactions due to underpolymerized molecules;
• The material does not cause strong burning in the lamp, except for thin, sensitive nails.
• It has good adhesion, while maintaining some elasticity of the material;
• A comfortable thixotropic consistency that does not spread, but works in tandem with the master's brush, creating a flawless architecture;
• Resistant to LEDs and UV;
• Worn up to 4 weeks;
• Safe 7 FREE warehouse.

Technique of working with hard material on natural nails:

• Clean manicure and good preparation (preferably not with a buff, but with a soft file);
• Nails should be healthy and not exhausted;
• The thickness of the material on the end must be at least 1mm;
• On soft and elastic nails, it is necessary to file the nail from the inside, so that there is no exfoliation. The cut-out area of ​​the material must be covered with a top without a sticky layer.

The technique of strengthening the "side" with 4 in 1 BIAB Gel PNB

1. Remove the old coating, perform a manicure, but do not remove the length of the nail.
2. Prepare the nail plate for coating, disinfect with Nail Prep PNB.
3. Apply a very thin layer (substrate) of 4 in 1 BIAB Gel PNB with rubbing movements, polymerize for 60 seconds.
4. Fix the free edge in the “side” technique.
5. Spread 4 in 1 BIAB Gel PNB on the free edge from stress zone #1 and on the growth points to stress zone #2, the thickness of the nail end around the entire perimeter should be 1.5 mm. Stress zones are those areas of the nail that suffer the most from pressure and load during growth.
6. Make a coating with a modeling layer of 4 in 1 BIAB Gel PNB (fill the sides and create the necessary architecture). Use half power when drying. Polymerize for 90-120 seconds.
7. Remove the sticky layer with Gel Cleanser PNB and remove the length.
8. Cover with gel polish and design (optional).
9. Apply Express/Protect/Powder/Shock/Art Top PNB.

Important!

1* BIAB coating does not contain harmful adhesive components, adhesion in this coating occurs due to a good volume of material in stress zones, so the use of the "edge" technique is a prerequisite for obtaining good results with material without using a primer.

2* You can use 4 in 1 BIAB Gel PNB in your usual gel strengthening techniques in a bottle, provided you use a primer and an elastic base-substrate.

How to use:

1. Remove the old coating, perform a manicure, but do not remove the length of the nail.
2. Prepare the nail plate for coating, disinfect with Nail Prep PNB.
3. Apply a very thin layer (substrate) of 4 in 1 BIAB Gel PNB with rubbing movements, polymerize for 60 seconds.
4. Consolidate the free edge using the "board" technique.
   Spread 4 in 1 BIAB Gel PNB on the free edge from stress zone #1 and on the growth points to stress zone #2, the thickness of the nail end around the entire perimeter should be 1 .5 mm. Stress zones are those areas of the nail that suffer the most from the influence of pressure and load from