Polygel for nail extention LUNAMoon Poly Gel No.11, 30 ml

POLY GEL — is a modern product based on a combination of acrylic and gel, which combines the strength of acrylic and the elasticity of gel.

Features of POLY GEL from LUNAmoon:

• Suitable for strengthening, restoration and extension, creating volumetric designs and working with upper forms.
• Easy to apply, does not flow, does not float from the temperature of the hands.
• Ideal for creating nude coatings and a display jacket.
• You can work with 4 nails at once - the material is static, holds its shape well.
• Suitable for clients prone to allergies.
• Suitable for working in the “dust-free” technique using upper forms.
• It is harder, unlike POLY GEL with sparkles, requires control of the thickness and uniformity of the material application to avoid transparent areas and cracks.
• Easy to dust: does not clog the file, does not scatter on the table, and the dust settles evenly down.
• Wavelength for polymerization 365-405 nm.
• UV/Led lamp power 36-48W.
• Full polymerization 120 seconds.
• An innovative product for craftsmen who work with creative forms and build complex architecture.

Recommendations:

• It is most convenient to apply with an orange stick.
• Before filing, we recommend removing the sticky layer.

Method seeding:

POLY GEL STRENGTHENING

1. Removal.
2. Do not file the nail shape or leave 2 mm in length, which we will remove after leveling.
3. With a 220-grit file, file without strong pressure on the nail from above, lifting the scales of the nail plate, or use a 100-grit buff.
4. Do a manicure.
5. If we work with removers, wash our hands with soap after working with them.
6. We degrease the nail using Nail Prep LUNAmoon in two approaches. The first approach is to wipe the surface of the nail with a napkin. The second approach is to place a napkin on an orange stick and wipe the cuticle and sinus area.
7. Use a primer if desired.
8. Apply the Rubber Base LUNAmoon substrate with a flat gel brush using rubbing movements.
9. Draw all the sinuses of the nail, dry in the lamp for 60 seconds.
10. Erase the stickiness.
11. Apply the polygel and level it.
12. If we work close to the cuticle, leave a 0.5–1 mm indent, dry in the lamp for 120 seconds.
13. After applying, file the form. This is necessary so that a thickness forms on the edge of the nail that will hold the free edge.
    If the nail is thin, it can curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no peeling of the material. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material from the free edge.
14. After filing, erase the sticky layer.
15. Cover with gel polish, if the design requires it. Dry for 60 seconds.
16. Cover with a top coat, dry for 120 seconds. After drying, do not wipe with anything so as not to lose the shine.

POLY GEL NAIL EXTENSIONS

1. Removal.
2. Shorten the length of the nail to 1 mm and form a round shape.
3. File with a 220-grit file without strong pressure or use a 100-grit buff.
4. Do a manicure.
5. If you work with removers, wash your hands with soap after working with them.
6. Degrease the nail with Nail Prep LUNAmoon in two approaches. The first approach is to wipe the surface. The second approach is to clean the cuticle and sinus area with an orange stick and a napkin.
7. Use LUNAmoon primer.
8. Apply the LUNAmoon Rubber Base with a flat brush in rubbing movements. Draw the sinuses, dry for 60 seconds.
9. Erase the stickiness.
10. Install the upper form with the desired architecture and length.
11. Apply POLY GEL to the form, apply to the nail and press. Dry in the lamp for 120 seconds.
12. Remove the form.
13. File the form. This is necessary so that a thickness is formed on the edge of the nail that will hold the free edge.
    If the nail is thin, it can curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no peeling of the material. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material from the free edge.
14. We erase the sticky layer and excess dust after filing.
15. If necessary, we walk Rubber Base over the areas where the file was. Dry for 30 seconds.
16. Cover with gel polish, if the design requires it. Dry for 60 seconds.
17. Cover with a top coat. Dry for 120 seconds. After drying, do not wipe with anything to preserve the shine.

POLY GEL from LUNAmoon is the freedom to create any shapes and designs without restrictions!

Product shelf life: 24 months. Store opened for no more than 18 months.