Color gel ADORE prof. Ultra Gel 30 ml №06 - ultraglass
Color modeling gel for nails 30 ml `06 - gray-blueULTRA GEL - thick gel for modeling and strengthening nails of bright colors. Densely pigmented, highly adhesive, does not change color after polymerization, does not shrink. Slowly self-levels with a brush, but quickly flows into a drop when turning the nail. It does not have a strong smell. The translucent shade of the gel smoothes the transition from a natural nail to an artificial one. Usage:1. modeling on the lower and upper forms, correction according to the technique "without sawdust"2. color strengthening of natural nails above average length Application technology: 0. Prepare the nail plate: perform a manicure, give the desired shape to the free edge of the nail. When using the remover, remove its residues with a damp cloth1. Degreasing: mechanically (using a buff) and chemically (using PREP&FINISH and a lint-free cloth) degrease the nail plate2. Dehydration/dehydration: apply NAIL FRESHER to the entire nail, allow to air dry until a whitish shade appears on the surface of the nail plate3. Bonding: With a semi-dry brush, apply ULTRABOND acid-free primer to the entire nail, leaving 1 mm from the cuticle and side ridges. Allow to air dry for 15 seconds.*if using MULTI BASE this step can be skipped 4. Base coat: prime coat of MULTI/RUBBER BASE shock absorbing base coat in a thin/rubbing coat. Cure the base coat in a UV lamp for 2-3 minutes, in a LED lamp for 60 seconds5. Modeling: • prepare and install the forms one by one on each finger, lay out a thin substrate of the desired length and shape directly on the lower or upper mold • model the architecture of the nail with gel • to create an arch, you can press the gel for 7-12 seconds, depending on the type and power of the lamp • send the nail to fully polymerize the gel for 60 seconds in LED -lamp or for 3-4 minutes in a UV lamp • remove residual stickiness with PREP&FINISH • perform step-by-step sawing of form6. Finishing coat: fix the coating with a top coat. Cure in a UV lamp for 2-3 minutes, in an LED lamp for 1 minute. When using a top with a sticky RUBBER TOP layer, allow the coating to cool, then remove the stickiness with PREP&FINISH and a lint-free cloth. depending on the type and power of the lamp • send the nail to fully polymerize the gel for 60 seconds in an LED lamp or for 3-4 minutes in a UV lamp • remove residual stickiness with PREP&FINISH • perform a step-by-step filing of the form6. Finishing coat: fix the coating with a top coat. Cure in a UV lamp for 2-3 minutes, in an LED lamp for 1 minute. When using a top with a sticky RUBBER TOP layer, allow the coating to cool, then remove the stickiness with PREP&FINISH and a lint-free cloth. depending on the type and power of the lamp • send the nail to fully polymerize the gel for 60 seconds in an LED lamp or for 3-4 minutes in a UV lamp • remove residual stickiness with PREP&FINISH • perform a step-by-step filing of the form6. Finishing coat: fix the coating with a top coat. Cure in a UV lamp for 2-3 minutes, in an LED lamp for 1 minute. When using a top with a sticky RUBBER TOP layer, allow the coating to cool, then remove the stickiness with PREP&FINISH and a lint-free cloth.
Color | blue |
Consistency | thick |
You can buy Color gel ADORE prof. Ultra Gel 30 ml №06 - ultraglass in our online store Limonad with delivery to Ukraine and Europe, including Poland, Germany, Bulgaria, Czech Republic, France, Romania and many other countries.
Manufacturer country:
Ukraine
Volume (ml, g):
30
Brand:
Adore Professional
No reviews found