Base PNB HEMA FREE Base UV/LED, 8 ml
This base coat has a modernized composition and has been successfully tested on allergy sufferers. Therefore, the use of HEMA FREE Base is the maximum comfort and safety for clients with any nail plate, especially for people with hypersensitive nails. Due to the consistency of medium viscosity, the material is perfectly distributed over the surface with minimal effort by the master. As a result, you get an ultra-durable coating of medium hardness. Rubber HEMA FREE Base ? This is a guarantee of safety for the master and the client.
ADVANTAGES:
- modernized composition;
- lack of HEMA monomer in the composition;
- tested for allergies;
- super adhesion;
- flexibility and moderate rigidity;
- hypoallergenic formula 12 FREE;
- during polymerization, the exothermic reaction is less pronounced;
- does not heat up on the nails to high temperatures, does not cause discomfort during polymerization;
- suitable for thin, damaged and sensitive nail plate;
- perfect consistency for smoothing nails;
- a wide range of possibilities: strengthening, restoration, extension of the free edge / corners up to 2 mm long;
- heavy-duty coating, without chips and peeling up to 28 days.
THIN APPLICATION. MODE OF APPLICATION:
- Prepare the nail plate with the PNB buff, remove the gloss.
- Apply auxiliary fluids: Nail Dehydrator and Bond Control to the entire plate.
- Apply a very thin, rubbing coat of HEMA FREE Base PNB, seal free edge, dry 60 sec.
- Apply an even thin layer. Cure in a lamp for 60 seconds. If necessary, remove the sticky layer with Gel Cleanser PNB.
- Cover/design, apply PNB top.
LEVELING TECHNIQUE. MODE OF APPLICATION:
- Prepare the nail plate with the PNB buff, remove the gloss.
- Apply auxiliary fluids: Nail Dehydrator and Bond Control to the entire plate.
- Apply a very thin, rubbing coat of HEMA FREE Base PNB, seal free edge, dry 60 sec.
- Apply a second, very thin layer of HEMA FREE Base PNB, place a drop of the base on the highest point of the nail and stretch it evenly to the free edge. Cure in a lamp for at least 1.5 minutes.
- If necessary, remove the sticky layer with Gel Cleanser PNB.
- Cover/design, apply PNB top.
RECOMMENDATIONS:
- for lack of sensations, the thickness of the coating should not exceed 1 mm;
- when leveling the nail plate, the thickness of the coating should not exceed 1.5 mm for complete polymerization of the product. It is recommended to work in a conveyor way, polymerizing each nail for several seconds, and finally? complete drying for 1-2 minutes, depending on the type of lamp and power;
- The exothermic reaction is more pronounced in summer at temperatures above 25 degrees. To avoid this, it is desirable to have air conditioning in the working room;
- you can also use the Low Heat Mode.
You can buy Base PNB HEMA FREE Base UV/LED, 8 ml in our online store Limonad with delivery to Ukraine and Europe, including Poland, Germany, Bulgaria, Czech Republic, France, Romania and many other countries.
- classical
No reviews found