Stained glass gel for volumetric designs Adore 3D Funky Art Gel 10 red, 15 ml
Gel for 3D designs - red stained glass
3D Funky Art Gel is a colored gel without a sticky layer for three-dimensional designs in a tube.
Used for:
- Korean-style designs: transparent flowers, waves, drops
- stucco moldings of three-dimensional elements straight from the tube
- increase the variability of designs: rub rubs, pigments, glitters onto the dried gel
Advantages of 3D Funky Art Gel:
- used at any stage of coating, including over top coat
- does not require a top coat
- it is convenient to control the thickness and volume of the material by increasing/decreasing the pressure on the tube
- easily cut with a router or saw
Consistency: thick. Curing speed: medium. After curing: hard. Viscosity: low. Pigmentation: high.
How to apply 3D gel?
1. Do preliminary preparation and apply base/gel/gel polish/color/top
2. Design: by pressing the tube, squeeze the required amount of gel onto the nail. If necessary, you can use a liner to correct the design. Cure in a UV/LED lamp for 120/90 seconds.
3. Finish: if color, rub-in or other decor was applied over the gel, secure the coating with a top coat. Cure in a UV/LED lamp for 1 minute or more.
ATTENTION! Before using the colored gel, we recommend rinsing the tube with your fingers.
PRO tip: for extreme volumes, prefer layering and curing the material. Recommended application thickness - up to 3 mm per layer
You can buy Stained glass gel for volumetric designs Adore 3D Funky Art Gel 10 red, 15 ml in our online store Limonad with delivery to Ukraine and Europe, including Poland, Germany, Bulgaria, Czech Republic, France, Romania and many other countries.
No reviews found
