Cuticle scissors professional Staleks Pro Asymmetric UNIQ 30 TYPE 4 (SQ-30/4)

Professional cuticle scissors STALEKS PRO Asymmetric UNIQ 30 4 are used for cutting skin during professional manicure and pedicure. Multi-level rings are convenient for implementing the master's ideas using various techniques and styles with one tool. The shape of the handles and the asymmetry of the rings provide more precision, the ability to perfectly remove thin skin.

Cuticle scissors professional Staleks About Asymmetric UNIQ 30 4: blade shape

Thin tapered blades with curved tips are suitable for working even with thin skin. The classic bending radius follows the cuticle line, resulting in a solid, precise and neat cut. When working with curved blades, the master has an overview of the working area, there is no need to turn the brush in the sinus area, the hand does not get tired even with prolonged work. The blades are polished on the outside and do not scratch the nail plate.

Handles and rings Asymmetric UNIQ 30 4

Cuticle scissors professional Staleks About Asymmetric UNIQ 30 4 — with rings at different levels. The graceful straight handles of the tool are ergonomic, working with them is not tiring. The right ring is located below the left, this is convenient for a comfortable position of the fingers during the procedure. The model in which the right ring is below the left is suitable for a master with a small hand.

Professional cuticle scissors STALEKS PRO Asymmetric UNIQ 30 4: design features

• professional leather scissors;
• thin tapered blades with curved tips;
• professional radius manual sharpening under a microscope;
• glossy edges polished with GOI paste;
• with asymmetric rings;
• straight handle shape;
• right-handed design;
• with a light, smooth ride;
• coating with anti-corrosion polishing;
• blade length – 24 mm;
• tool length – 97/104 mm;
• material – solid medical steel;
• can be disinfected and sterilized.

Cleaning the tool

Professional manicure scissors should be cleaned and disinfected after each use. For the safety of the master and clients, the work table should be kept clean, and all stages of disinfection and sterilization should be observed. In addition, gloves and masks should be used. Let's consider the stages of processing step by step.

Step 1. Disinfection . It is carried out to destroy pathogenic and opportunistic microorganisms, as well as to reduce the number of fungal spores. To do this, the instrument should be immersed in a disinfectant solution, for example, Staleks Pro disinfectant. Then follow the manufacturer's instructions for the solution. The usual processing time is 15-30 minutes. When buying disinfectants, it is better to choose those whose instructions indicate the activity of hepatitis B, C and dermatomycosis viruses. Disinfection can be combined with washing in special devices to destroy blood and dirt particles using vibration.

Step 2. Washing . To remove any chemical solution residue, wash the tool with water and a special detergent manually or use a washing machine. In places of screws and other connections, use special brushes with plastic bristles, carefully handling the cutting parts. An ultrasonic bath is also suitable for cleaning.

Step 3. Drying . To dry, carefully lay the scissors open, cutting side up, on disposable paper towels, then place them in craft bags. The instrument must be absolutely dry, since any remaining moisture may cause corrosion during subsequent sterilization.

Step 4. Sterilization . Destroys not only bacteria, but also viruses and fungal spores. Follow the instructions of the sterilizer or solution manufacturer. Sterilization can be physical and chemical. Physical - hot, using high temperatures in steam equipment (autoclave) or dry air (dry heat), chemical - cold, using specialized chemical solutions.

Recommendations for sterilization and disinfection :

1. Despite the anti-corrosion coating of Staleks Pro scissors, they should not be soaked in water for a long time, as this will reduce the anti-corrosion protection.
2. Disinfectant for metal instruments. Do not use aggressive substances such as acetone and alkalis to treat instruments.
3. Use a special container for chemically aggressive products. The disinfectant solution should cover the instrument at least 1 cm, the concentration and holding time are indicated on the product packaging.
4. After disinfection, thoroughly clean the scissors from any remaining solution, as this may cause corrosion.
5. After sterilization, leave the instrument in a dry heat sterilizer or autoclave until it cools completely, since a sharp temperature change can damage the physical properties of the steel, and sharpening will be required more often.
6. Fill the sterilizer 70% so as not to block the ventilation holes, fold the craft bags in one layer.
7. After sterilization, check the external indicators, which will change color if the procedure is successful. Open and remove the sterile instrument directly in front of the client.
8. If the scissors are equipped with silicone inserts, they must be removed before the procedures, cleaned of dirt, and put back on after the procedures.

How to check the cutting quality of a tool

The sharpness of the Uniq series leather scissors is tested on a collar napkin.

• Prepare the material on which the cut will be tested. Make sure it is level and sufficiently taut.
• Take the manicure scissors you want to test in your working hand. Open the tool, holding it relative to the material as you would when working with nail plate correction/cuticle trimming.
• Bring the material for testing between the cutting edges from the tip to the required sharpening length of the working cutting part and begin to smoothly make a cut. Perform it with a little pressure. Make sure that the tool does not touch, but makes an even and soft cut.
• Repeat the process to ensure the result is achieved. Make sure the cut is clear and light.
• If the scissors have done their job successfully and the cut is smooth and soft, then they are suitable for work.
• If the tool gets caught or the cut is uneven, it should be replaced or contact a service center to sharpen the blades.

Characteristics