Eyelash lamination tool Staleks Pro EXPERT 10 (LTE-10)

Staleks eyelash lamination tool Pro EXPERT 10 helps to lay out hairs on the rollers during the lamination or bio-curling procedure. The thin sharp working edge is ideal for working with individual eyelashes, separating and gently pressing them to the rollers.

The multifunctional Staleks eyelash curling tool Staleks Pro EXPERT 10 is made of high-alloy stainless steel with an L-shaped working part curved by 135 degrees. The specially designed shape and length of the tip are suitable for working with any length of eyelashes.

Staleks Ob Expert 10 eyelash tool is equipped with a handle with notches, so it fits comfortably and stably in the master’s hand, without slipping during the procedure.

It is advisable to buy the Staleks PRO Expert 10 tool for lamination and curling of eyelashes together with rollers, tweezers, lamination and care, replenishing the stock of products for performing the procedure.

Staleks eyelash lamination tool Pro EXPERT 10 - features:

• for eyelash care procedures;
• convenient to work with any length of eyelashes;
• material – high-alloy stainless steel;
• handle with knurling for stability in the master's hand;
• is subject to disinfection;
• resistant to sterilization in dry heat and autoclave;
• diameter – 5.9 mm;
• total length – 130 mm, working part – 7 mm;
• bending angle 135 degrees;
• weight - 20 g.

Staleks eyelash curler Staleks Pro EXPERT 10 - use:

1. Select a roller of the required size that fits snugly on the client's eyelid. Apply glue to the surface to fix the eyelashes.
2. Using light movements of the L-shaped steel tool, run it along the eyelashes, pressing it to the surface of the roller covered with glue. Start from the inner corner of the eye.
3. Fixation occurs gradually: move the working part from the base of the eyelashes to the tips, ensuring a tight fit of the hairs to the roller.
4. Use the thin working part to distribute the eyelashes parallel to each other. In case of crossing and uneven placement, the tool allows you to delicately correct them without damaging the shape.
5. When all the lashes are evenly positioned on the roller, double-check that they are pressed evenly.

Cleaning recommendations

Staleks instruments can withstand all types of disinfection and sterilization (cold or hot).

• Immediately after use, carefully remove dirt from the surface. Use eyelash extension glue remover - it effectively removes glue while preserving the surface of the tool.
• Prepare a disinfectant solution following the manufacturer's instructions for time and concentration. It is recommended to choose products that destroy hepatitis B, C and dermatomycosis viruses.
• Sterilization. Place the instrument in a sterilization bag designed for tendon or autoclave containers to avoid damage and ensure proper air or steam circulation. In a dry heat oven: at 180 ° C for 60 minutes, 160 ° C for 150 minutes.
• When using an autoclave, the sterilization time at a temperature of 120°C, a pressure of 1.1 atm. for 45 minutes; 132°C, a pressure of 2 atm. - 20 minutes. After sterilization in an autoclave, give the instrument 1 hour to cool down - sudden changes in temperature can damage it.
• Regularly check the autoclave or tendon performance with biological indicators to ensure sterilization is effective.

Storage Features

• Store the instrument in a dry, clean condition, in a sterile, closed container. Choose a dry storage location to prevent rust and mold.
• Avoid falling, exposure to moisture, dust, loose and abrasive substances.

Characteristics