Staleks Pro EXPERT diamond cutter, rounded cylinder, red, diameter 2.5 mm/working part 10 mm (FA30R025/10)

Staleks diamond cutter cylinder rounded for manicure and pedicure with red notch EXPERT d-2.5 mm working part 10 mm - a fine abrasive tool with diamond coating for delicate skin treatment. The rounded cylinder shape processes side ridges, calluses and cracks, removes gel and acrylic build-up, polishes nail plates before applying artificial material. Suitable for beginners and experienced nail technicians.

The cutter for grinding the skin around the nail is made by spraying diamond grit onto a metal blank made of medical-grade stainless steel. Fine-grained diamond grains are applied: they evenly and densely cover the entire working area without gaps or sticking in one place. The grit is fixed on the blank as a result of a galvanic process: a thin layer of nickel holds the diamond grains, making the connection strong and durable.

This spraying technology makes the tool hard and wear-resistant, eliminates unevenness on the surface of the working part. Due to the high quality of the diamond chips, the rounded cylinder cutter will last longer, and its rotation center does not shift during operation at high speeds of the cutter.

The Staleks rounded cylinder EXPERT cutter for hardware manicure and pedicure Red (soft abrasiveness) 2.5 mm delicately processes the side ridges, polishes the nail plates, eliminating irregularities, removes material build-up without the risk of injuring the client.

What is a cylinder cutter used for in a pedicure? It gently grinds cracks, dry calluses and corns. It is important to cultivate the area smoothly, without pressing, moving the tip, avoiding sudden movements and prolonged exposure to one place.

The shank diameter is standard for a milling machine – 2.36 mm +0/-0.016 mm. The maximum permissible rotation speed of the diamond attachment is up to 30,000 rpm. It is important to follow the recommendations for the number of revolutions for each type of cutter and procedure – working at high speeds can cause the cutter to overheat and injure the client.

Optimal speed for performing manicure procedures:

• Natural nails and skin, thousand rpm: 5-10 - filing, reducing thickness, grinding, polishing; 10-15 - removing cuticles, grinding side ridges.
• Artificial nails, thousand rpm: 15-20 - thickness removal, shaping; 20-25 - coating removal, design; 25-30 - free edge formation; more than 30 - individual types of design, other work.
• Pedicure, thousand rpm: 5-15 - removal of corns, skin polishing; 15-25 - cleaning cracks, removal of superficial calluses; 25-30 and more - work with core calluses, other types of work.

The cylinder nozzle with red notches is safe when used correctly, resistant to corrosion. High-quality steel and diamond coating will not be damaged by sterilization and disinfection in various ways, except for the use of disinfectant solutions based on active oxygen.

Staleks diamond cutter cylinder rounded for manicure and pedicure with red notch EXPERT d-2.5 mm working part 10 mm.

• purpose: hardware manicure and pedicure;
• shape: rounded cylinder;
• base material: stainless steel;
• high quality diamond coating;
• notch: red;
• abrasiveness: fine;
• hardness: soft;
• size of the working part: length – 10 mm, diameter – 2.5 mm;
• recommended speed: up to 30 thousand revolutions per minute;
• service life: 3-4 months;
• corrosion resistance;
• withstands all types of disinfection and sterilization;
• in a package: 1 pc.

Staleks milling cutter, rounded cylinder, EXPERT, for hardware manicure and pedicure, Red (soft abrasiveness), 2.5 mm.

1. Choose a tool based on the type of area being treated: cutters for cracks on heels, attachments for grinding, length cutting, etc. It is important to follow the recommended number of revolutions for a specific cutter to avoid overheating the tool and injuring the client.
2. Do not throw or hit the attachment - this may cause the rotation center to shift and lead to defects. A deformed cutter cannot be used.
3. Regularly check the cylinder cutter for manicure for correct centering visually or with a special tool.
4. When working, use gloves, safety glasses or a shield.

Cleaning diamond bits

Staleks can withstand all types of disinfection and sterilization (cold or hot).

• Remove the handle of the device immediately after use. Using a soft brush, carefully remove any remaining nail dust and other dirt. Try not to scratch the surface of the nozzle to avoid damage.
• To remove light dirt from the pedicure cylinder cutter and other types of attachments, it is not recommended to rinse them with running water using a brush, so as not to splash drops with possible pathogens.
• Disinfection: Prepare a disinfectant solution and place the attachments in it, following the manufacturer's instructions for time and concentration. It is recommended to choose products that destroy hepatitis B, C and dermatomycosis viruses.
• Use a container with warm soapy water and a mild detergent. Dip the grinding burs in the solution for 10-15 minutes to soften the remaining dirt. You can use an ultrasonic bath for a deeper pre-sterilization cleaning.
• Sterilization. Place the tips in sterilization bags intended for tendon or autoclave containers to avoid damage and ensure proper air or steam circulation. at 180°C for 60 minutes, 160°C for 150 minutes.
• Autoclave sterilization time: at 120°C, 1.1 atm. pressure for 45 minutes; 132°C, 2 atm. pressure - 20 minutes. After autoclave sterilization, it is recommended to leave the instrument for 1 hour to cool down, so that sudden temperature changes do not damage the nozzle.
• Regularly check the autoclave or tendon performance with biological indicators to ensure sterilization is effective.

Storage of diamond bits

• Store the attachments clean and dry in a sterile, closed container. Choose a dry storage location to prevent rust and mold.
• Avoid getting moisture, dust, and abrasives between the working surfaces of the cutters.

When to change the tool

If the nail grinder and other diamond tips are used, stored and cleaned correctly, they will last for 3-4 months. The metal will not be corroded, and the diamond coating will be uniform, without gaps. There should be no burrs or chips on the tip of the sharp shapes.

When it's time to change attachments:

1. The working area has lost its abrasiveness, has become smooth in places or has become clogged with material. Chips have formed at the tip of sharp shapes.
2. The material takes longer to remove than usual, you want to press more on the cutter to get results.
3. The attachment vibrates and causes a burning sensation when removing the coating.

Curvature of the nozzle. Cutters can become curved as a result of falls, long-term use, and be destroyed by aggressive disinfectants and high temperatures during sterilization. A curved cutter for processing side ridges, removing the coating and other procedures strongly knocks on the client's nail, overheats due to vibrations, which reduces the service life of the device handle.

Characteristics