Staleks Pro EXPERT diamond cutter, rounded cylinder, blue, diameter 2.5 mm/working part 10 mm (FA30B025/10)

STALEKS PRO milling cutter Cylinder rounded Blue EXPERT 2.5 mm - a medium abrasive attachment with diamond coating for delicate skin treatment. This shape treats lateral ridges, calluses, cracks, removes gel and acrylic build-up, polishes nail plates before applying artificial material. It is advisable to avoid treating natural nails with medium-hard abrasives.

Staleks About diamond milling cutter cylinder rounded blue EXPERT 2.5 mm is produced by spraying diamond chips on a metal workpiece made of medical grade stainless steel. Grains of medium fraction are applied: moderately, densely covering the entire working area, without gaps, sticking in one place. The chips are fixed as a result of the galvanic process: a thin layer of nickel holds the diamond grains, making the connection strong and durable.

This spraying technology makes the working area rigid, wear-resistant, and eliminates surface irregularities. Due to the high quality of the crumbs, the nozzle will last longer, and its rotation center will not shift when working at high milling speeds.

The nail grinder delicately processes the side ridges, quickly grinds the nail plates, eliminating irregularities, removes material build-up. It is important to cultivate the area smoothly, without pressure, avoid sudden movements, prolonged exposure to one place.

When performing a pedicure, blue-notched heel cutters gently and quickly treat cracks, dry calluses, corns, and remove thickened skin without the risk of injuring the client.

The standard shank diameter is 2.36 mm +0/-0.016 mm. The maximum permissible rotation speed is up to 30,000 rpm. It is important to observe the recommended number of revolutions for each type of attachment and procedure to avoid overheating and injury to the client.

Optimal speed for performing manicure procedures:

• Natural nails, skin, thousand rpm: 5-10 - filing, reducing thickness, grinding, polishing; 10-15 - removing cuticles, grinding side ridges, cleaning pockets.
• Artificial nails, thousand rpm: 15-20 - thickness removal, shaping; 20-25 - coating removal, design; 25-30 - free edge formation; more than 30 - individual types of design, other works.
• Pedicure, thousand rpm: 5-15 - removal of corns, skin polishing; 15-25 - cleaning cracks, removal of superficial calluses; 25-30 and more - work with core calluses, other types of work.

The blue notched cutter for grinding the skin around the nail is safe when used correctly, is resistant to corrosion. It will not be damaged by sterilization and disinfection (cold or hot) except for the use of disinfectant solutions based on active oxygen.

STALEKS PRO milling cutter Cylinder rounded Blue EXPERT 2.5 mm.

• purpose: pedicure, hardware manicure;
• shape: rounded cylinder;
• base material: stainless steel;
• high quality diamond coating;
• knurling: blue;
• abrasiveness: medium;
• size of the working part: length – 10 mm, diameter – 2.5 mm;
• recommended speed: up to 30 thousand rpm;
• service life: 3-4 months;
• corrosion resistance;
• in a package: 1 pc.

Staleks About diamond cutter cylinder rounded blue EXPERT 2.5 mm - application:

1. Choose a tip based on the type of area being treated: a cutter for removing gel, grinding, cutting off length, etc. It is also important to observe the recommended number of revolutions to avoid overheating and injury to the client.
2. Do not throw or hit the tool - this may cause the rotation center to shift and lead to defects. A deformed tip cannot be used.
3. Regularly check the side bead cutter for correct centering visually or with a special tool.
4. When working, use gloves, safety glasses or a shield.

Cleaning diamond bits

• Remove the tip from the handle of the device immediately after use. Using a soft brush, carefully remove any remaining nail dust and other dirt. Try not to scratch the surface to avoid damage.
• To remove light dirt, it is not recommended to rinse with running water using a brush to prevent the spread of splashes with possible pathogens.
• Disinfection: prepare a disinfectant solution, place the nozzles, following the manufacturer's instructions for concentration, sometimes. It is recommended to choose products that destroy hepatitis B, C, dermatomycosis viruses.
• Washing: Use a container with warm soapy water, mild detergent. Load the instruments for 10-15 minutes to soften the remaining dirt. You can use an ultrasonic bath for deeper pre-sterilization cleaning.
• Sterilization: Place instruments in tendon sterilization bags or autoclave containers to protect them from damage and ensure proper air or steam circulation.
• Sterilization time in a dry heat sterilizer: at a temperature of 180°C for 60 minutes, at 160°C for 150 minutes. Autoclave: at a temperature of 120°C, a pressure of 1.1 atm. - 45 minutes; 132°C, a pressure of 2 atm. - 20 minutes. After completion of the process, it is recommended to leave the tips for 1 hour to avoid sudden temperature changes.
• Regularly check the operation of the autoclave or tendon using biological indicators.
• Store in a dry, clean, closed container. Choose a dry storage location to prevent rust and mold. Avoid moisture, dust, loose or abrasive substances between work surfaces.

When to change the tool

Proper use, storage and cleaning will keep it working for up to 3-4 months.

When it's time to change attachments:

1. The metal became covered with corrosion, the coating became uneven, with bald spots.
2. The working area lost its abrasiveness, became smooth in some places, and became clogged with material. Chips formed on the tip of sharp shapes, and burrs appeared.
3. The material takes longer to remove than usual, and you want to press more to get the result.
4. The tool vibrates when removing the coating, causing a burning sensation.
5. Curvature. The tips can become curved as a result of falls, long-term use, and be destroyed by aggressive disinfectants and high temperatures during sterilization. They hit the client's nail hard, become excessively hot due to vibration, which reduces the service life of the device handle.

Characteristics