Staleks Pro EXPERT diamond cutter, sharp red pear, diameter 4 mm/working part 12 mm (FA100R040/12)

Staleks Pro diamond cutter pear sharp red EXPERT 4 mm working part 12 mm - a fine abrasive tool with diamond coating for delicate skin treatment. The sharp pear shape combines the functions of a ball and a sharp flame, so it can work in hard-to-reach places, treat skin and grind nail plates without the risk of injury. Suitable for beginners and experienced nail masters.

Staleks Pro diamond tip pear sharp red notch Red soft abrasiveness for hardware manicure and pedicure EXPERT 4 mm is produced by spraying diamond chips on a metal blank made of stainless steel. Fine-fraction diamond grains are applied: evenly and densely cover the entire working area without gaps and sticking in one place. The chips on the blank are fixed as a result of the galvanic process: a thin layer of nickel holds the diamond grains, making the connection strong and durable.

This spraying technology makes the tool hard and wear-resistant, eliminates unevenness on the surface of the working area. Due to the high quality of the diamond chips, the attachment will last longer, and its rotation center does not shift when working at high speeds of the milling cutter.

The sharp pear with a red notch delicately polishes the nail plates without damaging them, processes the lateral ridges and sinuses around the nail. Its sharp shape carefully and gently lifts and removes the cuticle, opens the sinuses, removes pterygia. In a pedicure, the attachment opens and polishes cracks, processes and removes calluses.

The diameter of the shank is standard for a milling machine - 2.36 mm +/- 0.016 mm. The maximum permissible value of the rotation speed of the diamond nozzle is up to 30,000 rpm. It is important to adhere to the recommendations for the number of revolutions for a certain type of cutters and procedures - working at high speeds can cause overheating of the cutter, injury to the client.

Optimal speed for performing manicure procedures:

• Natural nails and skin, thousand rpm: 5-10 - filing, reducing thickness, grinding, polishing; 10-15 - removing cuticles, grinding side ridges.
• Artificial nails, thousand rpm: 15-20 - thickness removal, shaping; 20-25 - coating removal, design; 25-30 - free edge formation; more than 30 - individual types of design, other work.
• Pedicure, thousand rpm: 5-15 - removal of corns, skin polishing; 15-25 - cleaning cracks, removal of superficial calluses; 25-30 and more - work with core calluses, other types of work.

It is recommended to buy a sharp red pear cutter for experienced nail masters and beginners because it is safe when used correctly. The tool with a high-quality diamond coating is resistant to corrosion, can be sterilized and disinfected in various ways, except for the use of disinfectant solutions based on active oxygen.

Diamond cutter Staleks Pro pear sharp red EXPERT 4 mm working part 12 mm.

• purpose: hardware manicure and pedicure;
• shape: sharp pear;
• base material: stainless steel;
• high quality diamond coating;
• notch: red;
• abrasiveness: fine;
• hardness: soft;
• size of the working part: length – 12 mm, diameter – 4 mm;
• recommended speed: up to 30 thousand revolutions per minute;
• service life: 3-4 months;
• corrosion resistance;
• withstands all types of disinfection and sterilization;
• in a package: 1 pc.

Staleks Pro diamond tip pear sharp red notch Red soft abrasiveness for hardware manicure and pedicure EXPERT 4 mm - application:

1. Choose a tool according to the type of area being treated: cuticle attachment, grinding, length cutting, etc. It is also important to follow the recommended number of revolutions for a specific cutter to avoid overheating the tool and injuring the client.
2. Do not throw or hit the attachment - this may cause the rotation center to shift and lead to defects. A deformed cutter cannot be used.
3. Regularly check the correctness of cuticle lifters and other centering attachments visually or with a special tool.
4. When working, use gloves, safety glasses or a shield.

Cleaning diamond bits

Staleks Pro withstands all types of disinfection and sterilization (cold or hot).

• Remove the handle of the device immediately after use. Using a soft brush, carefully remove any remaining nail dust and other dirt. Try not to scratch the surface of the nozzle to avoid damage.
• To remove light dirt from the cutter for grinding the skin around the nail and other types of attachments, it is not recommended to wash them with running water using a brush, so as not to splash drops with possible pathogens.
• Disinfection: Prepare a disinfectant solution and place the attachments in it, following the manufacturer's instructions for time and concentration. It is recommended to choose products that destroy hepatitis B, C and dermatomycosis viruses.
• Use a container with warm, soapy water and a mild detergent. Dip heel cutters and other types of attachments into the solution for 10-15 minutes to soften any remaining dirt. You can use an ultrasonic bath for a deeper pre-sterilization cleaning.
• Sterilization. Place the tips in sterilization bags intended for tendon or autoclave containers to avoid damage and ensure proper air or steam circulation. at 180°C for 60 minutes, 160°C for 150 minutes.
• Autoclave sterilization time: at 120°C, 1.1 atm. pressure for 45 minutes; 132°C, 2 atm. pressure - 20 minutes. After autoclave sterilization, it is recommended to leave the instrument for 1 hour to cool down, so that sudden temperature changes do not damage the nozzle.
• Regularly check the autoclave or tendon performance with biological indicators to ensure sterilization is effective.

Storage of diamond bits

• Store the attachments clean and dry in a sterile, closed container. Choose a dry storage location to prevent rust and mold.
• Avoid getting moisture, dust, and abrasives between the working surfaces of the cutters.

When to change the tool

If diamond bits are used, stored and cleaned correctly, their functionality will remain for 3-4 months. The metal will not be covered with corrosion, and the diamond coating will be uniform, without gaps. There should be no burrs or chips on the tip of sharp shapes.

When it's time to change attachments:

1. The working area has lost its abrasiveness, has become smooth in places or has become clogged with material. Chips have formed at the tip of sharp shapes.
2. The material takes longer to remove than usual, you want to press more on the cutter to get results.
3. The attachment vibrates and causes a burning sensation when removing the coating.

Curvature of the nozzle. Cutters can become curved as a result of falls, long-term use, and be destroyed by aggressive disinfectants and high temperatures during sterilization. A curved cutter for processing side ridges, removing the coating and other procedures strongly knocks on the client's nail, overheats due to vibrations, which reduces the service life of the device handle.

Characteristics