Staleks Pro EXPERT diamond cutter, sharp pear, blue, diameter 4 mm/working part 12 mm (FA100B040/12)

Pear cutter diamond sharp STALEKS PRO Expert Blue blue 4 mm working part 12 mm - a tool of medium abrasiveness with diamond coating for fine processing of leather. The shape of the "pear sharp" combined the functions of a ball and a sharp flame, so it can work in hard-to-reach places, process external areas of the skin, grind artificial nail plates without the risk of injury. Suitable for work by beginners and experienced nail masters.

STALEKS PRO Expert diamond cutter Pear sharp Blue is produced by spraying diamond grit on a metal workpiece made of medical grade stainless steel. Medium fraction diamond grains are applied: moderately, densely covering the entire working area with a diameter of 4 mm, without gaps, sticking in one place. The crumbs on the workpiece are fixed as a result of the galvanic process: a thin layer of nickel holds the diamond grains, making the connection strong and durable.

This spraying technology gives the pear cutter rigidity and wear resistance, eliminates unevenness on the surface of the working area. Due to the high quality of the diamond chips, the attachment will last longer, and its rotation center does not shift when working at high speeds of the cutter.

Manicure cutter pear sharp with blue notch from Staleks About Expert delicately polishes artificial nail plates, processes lateral ridges, periungual sinuses, cleans nail plates, removes cuticle, pterygium, opens sinuses. It is important to smoothly, gently move the tip along the edge of the nail, avoiding sudden movements and prolonged exposure to one place.

A diamond pedicure cutter with a sharp tip and medium hardness quickly and gently opens, polishes cracks, and processes and removes calluses.

The diameter of the shank is standard for a milling machine – 2.36 mm +/- 0.016 mm. The maximum permissible rotation speed of the diamond manicure attachment is up to 30,000 rpm. It is important to follow the recommendations for the number of revolutions for a certain type of cutters and procedures – working at high speeds can cause overheating of the tool and injury to the client.

Optimal speed for performing manicure procedures:

• Natural nails and skin, thousand rpm: 5-10 - filing, reducing thickness, grinding, polishing; 10-15 - removing cuticles, grinding side ridges.
• Artificial nails, thousand rpm: 15-20 - thickness removal, shaping; 20-25 - coating removal, design; 25-30 - free edge formation; more than 30 - individual types of design, other work.
• Pedicure, thousand rpm: 5-15 - removal of corns, skin polishing; 15-25 - cleaning cracks, removal of superficial calluses; 25-30 and more - work with core calluses, other types of work.

The cuticle pusher is suitable for experienced nail artists and beginners because it is safe when used correctly. The tool with a high-quality diamond coating is resistant to corrosion, can be sterilized and disinfected in various ways, except for the use of disinfectant solutions based on active oxygen.

Pear cutter diamond sharp STALEKS PRO Expert Blue blue 4 mm working part 12 mm.

• purpose: pedicure, hardware manicure;
• shape: sharp pear;
• base material: stainless steel;
• high quality diamond coating;
• knurling: blue;
• abrasiveness: medium;
• size of the working part: length – 12 mm, diameter – 4 mm;
• recommended speed: up to 30 thousand revolutions per minute;
• service life: 3-4 months;
• corrosion resistance;
• withstands all types of disinfection and sterilization;
• in a package: 1 pc.

STALEKS PRO Expert diamond cutter Pear sharp Blue - application:

1. Choose a tool according to the type of area being treated: cuticle lifter, grinding, length cutting, etc. It is also important to follow the recommended number of revolutions for a specific tool to avoid overheating and injury to the client.
2. Do not throw or hit the attachment - this may cause the rotation center to shift and lead to defects. A deformed cutter cannot be used.
3. Regularly check the correct centering of the manicure cutter visually or with a special tool.
4. When working, use gloves, safety glasses or a shield.

Cleaning and sterilization of instruments

STALEKS PRO Expert tips withstand all types of disinfection and sterilization (cold or hot).

• Remove the tip from the handle of the device immediately after use. Using a soft brush, carefully remove any remaining nail dust and other dirt. Try not to scratch the surface of the tip to avoid damage.
• To remove light dirt from the nail drill bit and other types of tips, it is not recommended to rinse them with running water using a brush, so as not to spread splashes with possible pathogens.
• Disinfection: prepare a disinfectant solution, put the instruments in it, following the manufacturer's instructions for time and concentration. It is recommended to choose products that destroy hepatitis viruses, C, dermatomycosis.
• Use a container of warm, soapy water and a mild detergent. Soak the safety burr and other types of attachments in the solution for 10-15 minutes to soften any remaining dirt. You can use an ultrasonic bath for a deeper pre-sterilization cleaning.
• Sterilization. Place the tips in sterilization bags intended for tendon or autoclave containers to avoid damage and ensure proper air or steam circulation. Sterilize at 180°C for 60 minutes, 160°C for 150 minutes.
• Autoclave sterilization time: at 120°C, 1.1 atm. pressure for 45 minutes; 132°C, 2 atm. pressure - 20 minutes. After autoclave sterilization, it is recommended to leave the instrument for 1 hour to cool down, so that sudden temperature changes do not damage the nozzle.
• Regularly check the autoclave or tendon performance with biological indicators to ensure sterilization is effective.

Storage recommendations

• Store the cuticle trimmer attachments and other tools in a dry, clean form, in a sterile, closed container. Choose a dry storage location to prevent rust and mold.
• Avoid getting moisture, dust, loose and abrasive substances between the working surfaces of the cutters.

When to change the tool

With proper use, storage, and cleaning, the tips will remain operational for up to 3-4 months. The metal will not be covered with corrosion, the diamond coating will be uniform, without gaps. There should be no burrs or chips on the tip of the sharp shapes.

When it's time to change attachments:

1. The working area has lost its abrasiveness, has become smooth in places or has become clogged with material. Chips have formed at the tip of sharp shapes.
2. The material takes longer to remove than usual, and you want to press harder on the cutter to get results.
3. The tool vibrates when removing the coating, causing a burning sensation.
4. Tip curvature. Cutters can become curved as a result of falls, long-term use, be destroyed by aggressive disinfectants, high temperatures during sterilization. A curved cutter for processing side ridges, removing coating, other procedures strongly knocks on the client's nail, overheats due to vibration, which reduces the service life of the device handle.

Characteristics