Staleks Pro EXPERT DUO diamond cutter, sharp pear, blue-green, diameter 5 mm/working part 12 mm (FA100BG050/12)

STALEKS PRO diamond cutter pear sharp blue-green DUO EXPERT 5 mm - a nozzle of medium-coarse abrasiveness with double diamond coating for delicate skin treatment. This shape combines the functions of a ball and a sharp flame, so it can work in hard-to-reach places, treat skin, clean nail plates of the epidermis, grind without the risk of injury.

STALEKS PRO diamond tip pear sharp DUO EXPERT medium abrasiveness for hardware manicure and pedicure 5 mm is produced by double spraying of diamond chips on a metal blank made of medical grade stainless steel. First, large-fraction grains are applied, then the gaps are evenly filled with standard crystals, densely covering the entire working area. The chips on the blank are fixed as a result of the galvanic process: a thin layer of nickel holds the grains, making the connection strong and durable.

This spraying technology gives the working part rigidity, wear resistance, eliminates surface unevenness. The DUO tip will last longer due to uniform double spraying without gaps, sticking in one place.

It is worth buying a cutter Pear sharp blue-green, because it delicately polishes the surface without injuring the client, processes the lateral ridges, sinuses around the nail. Its sharp shape carefully, gently lifts, removes the cuticle, opens the sinuses, removes pterygium. In a pedicure, it opens, polishes cracks, processes, removes calluses.

The standard shank diameter is 2.36 mm +0/-0.016 mm. The maximum permissible rotation speed is up to 30,000 rpm. It is important to observe the recommended number of revolutions for each type of attachment and procedure to avoid overheating and injury to the client.

Optimal speed for performing manicure procedures:

• Natural nails, skin, thousand rpm: 5-10 - filing, reducing thickness, grinding, polishing; 10-15 - removing cuticles, grinding side ridges, cleaning pockets.
• Artificial nails, thousand rpm: 15-20 - thickness removal, shaping; 20-25 - coating removal, design; 25-30 - free edge formation; more than 30 - individual types of design, other works.
• Pedicure, thousand rpm: 5-15 - removal of corns, skin polishing; 15-25 - cleaning cracks, removal of superficial calluses; 25-30 and more - work with core calluses, other types of work.

The DUO cuticle attachment is safe when used correctly, is corrosion resistant, and will not be damaged by sterilization or disinfection (cold or hot) except when using disinfectant solutions based on active oxygen.

STALEKS PRO diamond burr pear sharp blue-green DUO EXPERT 5 mm - features:

• purpose: hardware manicure and pedicure;
• shape: sharp pear;
• base material: stainless steel;
• double diamond coating increases the service life of the nozzle;
• blue-green notch: green on top, blue underneath;
• abrasiveness: medium-coarse;
• hardness: medium-coarse;
• size of the working part: length – 12 mm, diameter – 5 mm;
• recommended speed: up to 30 thousand revolutions per minute;
• service life: 3-4 months;
• corrosion resistance;
• withstands all types of disinfection and sterilization;
• in a package: 1 pc.

STALEKS PRO diamond tip pear sharp DUO EXPERT medium abrasiveness for hardware manicure and pedicure 5 mm.

1. Choose a tip based on the type of area being treated: a cutter for grinding the skin around the nail, filing the length, etc. It is also important to observe the recommended number of revolutions to avoid overheating and injury to the client.
2. Do not throw or hit the tool - this may cause the rotation center to shift and lead to defects. A deformed tip cannot be used.
3. Check the heel crack cutter regularly for correct alignment, either visually or with a special tool.
4. When working, use gloves, safety glasses or a shield.

Cleaning diamond bits

• Remove the tip from the handle of the device immediately after use. Using a soft brush, carefully remove any remaining nail dust and other dirt. Try not to scratch the surface to avoid damage.
• To remove light dirt, it is not recommended to rinse with running water using a brush to prevent the spread of splashes with possible pathogens.
• Disinfection: prepare a disinfectant solution, place the nozzles, following the manufacturer's instructions for concentration, sometimes. It is recommended to choose products that destroy hepatitis B, C, dermatomycosis viruses.
• Washing: Use a container with warm soapy water, mild detergent. Load the instruments for 10-15 minutes to soften the remaining dirt. You can use an ultrasonic bath for deeper pre-sterilization cleaning.
• Sterilization: Place instruments in tendon sterilization bags or autoclave containers to protect them from damage and ensure proper air or steam circulation.
• Sterilization time in a dry heat sterilizer: at a temperature of 180°C for 60 minutes, at 160°C for 150 minutes. Autoclave: at a temperature of 120°C, a pressure of 1.1 atm. - 45 minutes; 132°C, a pressure of 2 atm. - 20 minutes. After completion of the process, it is recommended to leave the tips for 1 hour to avoid sudden temperature changes.
• Regularly check the operation of the autoclave or tendon using biological indicators.
• Store in a dry, clean, closed container. Choose a dry storage location to prevent rust and mold. Avoid moisture, dust, loose or abrasive substances between work surfaces.

When to change the tool

Proper use, storage and cleaning will keep it working for up to 3-4 months.

When it's time to change attachments:

1. The metal became covered with corrosion, the coating became uneven, with bald spots.
2. The working area lost its abrasiveness, became smooth in some places, and became clogged with material. Chips formed on the tip of sharp shapes, and burrs appeared.
3. The material takes longer to remove than usual, and you want to press more to get the result.
4. The tool vibrates when removing the coating, causing a burning sensation.
5. Curvature. The tips can become curved as a result of falls, long-term use, and be destroyed by aggressive disinfectants and high temperatures during sterilization. They hit the client's nail hard, become excessively hot due to vibration, which reduces the service life of the device handle.

Characteristics