Staleks Pro EXPERT DUO diamond cutter, flame red-blue, diameter 2.1 mm/working part 8 mm (FA11RB021/8)

Staleks Pro EXPERT DUO diamond flame cutter with red-blue notch 2.1 mm working part 8 mm - a tool of soft-medium abrasiveness with double diamond coating, designed for delicate skin treatment. The sharp flame shape allows you to work in hard-to-reach places, process the cuticle and side ridges, give shape to the regrown part of the nail plate and grind the surface. Suitable for beginners and experienced nail masters.

The Staleks Pro EXPERT medium-soft DUO flame diamond cutter for manicure and pedicure is produced by double spraying of diamond chips onto a metal workpiece made of medical-grade stainless steel. First, medium-fraction diamond grains are applied, then the gaps between the standard chips are evenly filled with small crystals, densely covering the entire working area. The chips are fixed on the workpiece as a result of a galvanic process: a thin layer of nickel holds the diamond grains, making the connection strong and durable.

This spraying technology gives the tool hardness and wear resistance, eliminates unevenness on the surface of the working part. The DUO flame cutter will last longer due to the double spraying of diamond chips and the fact that the diamond grain is evenly applied, without gaps and sticking in one place.

The flame cutter for manicure with double notches lifts and removes cuticles, processes lateral ridges and periungual sinuses, cuts out detachment without the risk of injury. In pedicure, the attachment delicately processes cracks and calluses. Its fine-medium abrasive effectively removes cuticles and polishes the skin without causing discomfort.

The shank diameter is standard for a milling machine – 2.36 mm +/- 0.016 mm. The maximum permissible rotation speed of the diamond attachment is up to 30,000 rpm. It is important to follow the recommendations for the number of revolutions for each type of cutter and procedure – working at high speeds can cause the cutter to overheat and injure the client.

Optimal speed for performing manicure procedures:

• Natural nails and skin, thousand rpm: 5-10 - filing, reducing thickness, grinding, polishing; 10-15 - removing cuticles, grinding side ridges.
• Artificial nails, thousand rpm: 15-20 - thickness removal, shaping; 20-25 - coating removal, design; 25-30 - free edge formation; more than 30 - individual types of design, other work.
• Pedicure, thousand rpm: 5-15 - removal of corns, skin polishing; 15-25 - cleaning cracks, removal of superficial calluses; 25-30 and more - work with core calluses, other types of work.

It is recommended to buy a flame cutter for manicure and pedicure for experienced nail masters and beginners, because it is safe when used correctly. The tool with a high-quality diamond coating is resistant to corrosion, can be sterilized and disinfected in various ways, except for the use of disinfectant solutions based on active oxygen.

Staleks Pro EXPERT DUO diamond flame cutter with red-blue notch 2.1 mm working part 8 mm - features:

• purpose: hardware manicure and pedicure;
• shape: flame sharp;
• base material: stainless steel;
• double diamond coating increases the service life of the nozzle;
• red and blue notches: blue on top, red underneath;
• abrasiveness: fine-medium;
• hardness: soft-medium;
• size of the working part: length – 8 mm, diameter – 2.1 mm;
• recommended speed: up to 30 thousand revolutions per minute;
• service life: 3-4 months;
• corrosion resistance;
• withstands all types of disinfection and sterilization;
• in a package: 1 pc.

Diamond cutter DUO flame for manicure and pedicure Staleks Pro EXPERT medium soft - application:

1. Choose the tool according to the type of area being treated: flame cutter with red notch for cuticle, grinding, length cutting, etc. It is important to follow the recommended number of revolutions for a specific cutter to avoid overheating the tool and injuring the client.
2. Do not throw or hit the attachment - this may cause the rotation center to shift and lead to defects. A deformed cutter cannot be used.
3. Regularly check the length cutter and other attachments for correct centering visually or with a special tool.
4. When working, use gloves, safety glasses or a shield.

Cleaning diamond bits

Staleks Pro withstands all types of disinfection and sterilization (cold or hot).

• Remove the handle of the device immediately after use. Using a soft brush, carefully remove any remaining nail dust and other dirt. Try not to scratch the surface of the nozzle to avoid damage.
• To remove light dirt from the cutter for grinding the skin around the nail and other types of attachments, it is not recommended to wash them with running water using a brush, so as not to splash drops with possible pathogens.
• Disinfection: Prepare a disinfectant solution and place the attachments in it, following the manufacturer's instructions for time and concentration. It is recommended to choose products that destroy hepatitis B, C and dermatomycosis viruses.
• Use a container with warm soapy water and a mild detergent. Soak the cuticle bit and other types of cutters in the solution for 10-15 minutes to soften any remaining dirt. You can use an ultrasonic bath for a deeper pre-sterilization cleaning.
• Sterilization. Place the tips in sterilization bags intended for tendon or autoclave containers to avoid damage and ensure proper air or steam circulation. at 180°C for 60 minutes, 160°C for 150 minutes.
• Autoclave sterilization time: at 120°C, 1.1 atm. pressure for 45 minutes; 132°C, 2 atm. pressure - 20 minutes. After autoclave sterilization, it is recommended to leave the instrument for 1 hour to cool down, so that sudden temperature changes do not damage the nozzle.
• Regularly check the autoclave or tendon performance with biological indicators to ensure sterilization is effective.

Storage of diamond bits

• Store the attachments clean and dry in a sterile, closed container. Choose a dry storage location to prevent rust and mold.
• Avoid getting moisture, dust, abrasives between the working surfaces of the cuticle lifter and other attachments.

When to change the tool

If diamond bits are used, stored and cleaned correctly, their functionality will remain for 3-4 months. The metal will not be covered with corrosion, and the diamond coating will be uniform, without gaps. There should be no burrs or chips on the tip of sharp shapes.

When it's time to change attachments:

1. The working area has lost its abrasiveness, has become smooth in places or has become clogged with material. Chips have formed at the tip of sharp shapes.
2. The material takes longer to remove than usual, you want to press more on the cutter to get results.
3. The attachment vibrates and causes a burning sensation when removing the coating.

Curvature of the nozzle. Cutters can become curved as a result of falls, long-term use, and be destroyed by aggressive disinfectants and high temperatures during sterilization. A curved cutter for filing a natural nail, removing a coating and other procedures hits the client's nail hard, overheats due to vibrations, which reduces the service life of the device handle.

Characteristics